Please use this identifier to cite or link to this item: https://cuir.car.chula.ac.th/handle/123456789/57937
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorBoonyarach Kitiyanan-
dc.contributor.authorBuch Kallapadee-
dc.contributor.otherChulalongkorn University. The Petroleum and Petrochemical College-
dc.date.accessioned2018-03-27T02:57:40Z-
dc.date.available2018-03-27T02:57:40Z-
dc.date.issued2017-
dc.identifier.urihttp://cuir.car.chula.ac.th/handle/123456789/57937-
dc.descriptionThesis (M.Sc.)--Chulalongkorn University, 2017en_US
dc.description.abstractSurfactant-enhanced carbon regeneration (SECR) is a regeneration process that utilizes surfactant solution to dissolve adsorbed organic from spent activated carbon. Sodium dodecyl sulfate (SDS) and methyl ester sulfonate (MES) are anionic surfactants that are used in this investigation. The study is done in 3 steps: sample characterization, regeneration and water flushing step. The proximate analysis of spent activate carbon contains 27.5% moisture, 27.2% volatile matter content, 10% total ash content. The spent activated carbon also contains 18.4% benzene. In regeneration step, the benzene removal by SDS and MES solution were compared. The effect of concentration, solution flow rate and temperature are studied. As expected, the benzene removal increased as the concentration of SDS or MES increased and the benzene removal by MES is higher than that by SDS at the same concentration. However, SDS was easier to be removed in washing step with deionized water than MES.en_US
dc.description.abstractalternativeการนำถ่านกัมมันต์กลับมาใช้ใหม่โดยสารลดแรงตึงผิวเป็นกระบวนการใช้สารละลายของสารลดแรงตึงผิวในการชะสารอินทรีย์ที่ติดอยู่ออกจากถ่านกัมมันต์ด้วยวิธีโซลูบิไลเซชัน โดยสารลดแรงตึงผิวที่ใช้ในการทดลอง คือ โซเดียมโดเดซิลซัลเฟต (Sodium dodecyl sulfate) และ เมทิล เอสเตอร์ซัลโฟเนต (Methyl ester sulfonate) ซึ่งเป็นสารลดแรงตึงผิวชนิดประจุลบ การทดลองได้แบ่งออกเป็น 3 ขั้นตอน คือ การหาคุณลักษณะของถ่านกัมมันต์ตัวอย่าง, กระบวนการนำกลับมาใช้ใหม่ และการชะสารลดแรงตึงผิวตกค้างด้วยน้ำตามลำดับ โดยตัวอย่างถ่านกัมมันต์มีความชื้น 27.5 เปอร์เซ็นต์, ปริมาณสารอินทรีย์ที่ผิว 27.2 เปอร์เซ็นต์, ปริมาณขี้เถ้าหลังจากการเผา 10 เปอร์เซ็นต์ และมีปริมาณเบนซีนที่ดูดซับ 18.4 เปอร์เซ็นต์โดยมวล ในกระบวนการนำกลับมาใช้ใหม่ ปริมาณเบนซีนที่ถูกดึงออกโดยสารลดแรงตึงผิวทั้งสองถูกเปรียบเทียบจากผลกระทบของความเข้มข้น, อัตราการไหลของสารละลายสารลดแรงตึงผิว และผลของอุณหภูมิ จากผลการทดลองพบว่า เมื่อเพิ่มความเข้มข้นของสารละลายสารลดแรงตึงผิวจะทำให้ปริมาณเบนซีนที่ถูกดึงออกมาจากถ่านกัมมันต์เพิ่มขึ้น และเมทิลเอสเตอร์ซัลโฟเนตสามารถดึงเบนซีนออกมาได้มากกว่าโซเดียมโดเดซิลซัลเฟตที่ความเข้มข้นเท่ากัน อย่างไรก็ตามโซเดียมโดเดซิลซัลเฟตที่ตกค้างสามารถชำระออกจากถ่านกัมมันต์ได้ด้วยน้ำกลั่นง่ายกว่าเมทิลเอสเตอร์ซัลโฟเนตen_US
dc.language.isoenen_US
dc.publisherChulalongkorn Universityen_US
dc.relation.urihttp://doi.org/10.58837/CHULA.THE.2017.426-
dc.rightsChulalongkorn Universityen_US
dc.subjectSurface active agentsen_US
dc.subjectCarbon, Activated -- Salvage (Waste, etc.)en_US
dc.subjectสารลดแรงตึงผิวen_US
dc.subjectคาร์บอนกัมมันต์ -- การใช้ประโยชน์จากของใช้แล้วen_US
dc.titleUse of Anionic Surfactant in Regeneration of Spent Activated Carbonen_US
dc.title.alternativeการใช้สารลดแรงตึงผิวประจุลบในการนำถ่านกัมมันต์ที่ใช้แล้วกลับมาใช้ใหม่en_US
dc.typeThesisen_US
dc.degree.nameMaster of Scienceen_US
dc.degree.levelMaster's Degreeen_US
dc.degree.disciplinePetroleum Technologyen_US
dc.degree.grantorChulalongkorn Universityen_US
dc.email.advisorBOONYARACH.K@CHULA.AC.TH-
dc.identifier.DOI10.58837/CHULA.THE.2017.426-
Appears in Collections:Petro - Theses

Files in This Item:
File Description SizeFormat 
5673005063_Buch Kal.pdf1.19 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.