Recently, bismuth containing material was used in a number of applications such as sensor, photocatalyst, and electronics. For instance, bismuth titanate sillenite phase performed a remarkable potential in visible light ...

Fibrous substrates of the blend solutions of Poly(E-caprolactone) (PCL)/Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) in a mixture of chloroform and N,N-dimethylformamide (DMF) wer fabricated by electrospinning. The ...

Cyclohexene oxide is an epoxide that serves as a valuable intermediate used in the petrochemical industry. The challenge encountered in production is the formation of undesirable products that are produced by side reactions, ...

Pyrolysis of waste tire is one of alternative techniques to produce petro-chemical products. Noble metals supported on acid zeolite catalysts, especially Pd and Ru supported on acid zeolites (HMOR and HBeta), were reported ...

The present work focuses on synthesizing polybenzoxazine via a facile "quasi-solventless" method by using bisphenol-A, formaldehyde and diamine to fabricage as membrane for spearation application. Four different diamines, ...

A sticky stain or filmy layer around sanitary wares results from the reaction between soap and divalent cations in hard water. The objective of this study was to investigate equilibrium solubility and dissolution rate of ...

Light olefins (both ethylene and propylene) are important intermediates widely used in the petrochemical industry. With the shortage of natural resource and the growing demand for light olefins, the production of light ...

In common industrial process, mass transfer control (mixed control) or dissolution control can be invlved for designing process equipment or determining the mechanisms of chemical reactions. A jet-impingement apparatus has ...

Currently, bioethanol produced from biomass can be used as a petrochemical feedstock to produce hydrocarbon compounds. Aromatics are one of the most interesting products. Consequently, the transformation of bioethanol to ...

The possibility of using cassava residue from a bioethanol plant containing 49.66% starch, 21.47% cellulose, 12.97% hemicellulose, and 21.86% lignin as a raw material to produce glucose using enzymatic hydrolysis was ...