Please use this identifier to cite or link to this item: https://cuir.car.chula.ac.th/handle/123456789/2250
Title: ไฟแสงสว่างแบบต่อเนื่อง : รายงาน
Other Titles: Uninterruptible lighting fixture
Authors: ยุทธนา กุลวิทิต
Email: Youthana.K@chula.ac.th
Other author: จุฬาลงกรณ์มหาวิทยาลัย. ภาควิชาวิศวกรรมไฟฟ้า
Subjects: สิ่งประดิษฐ์
การส่องสว่างด้วยไฟฟ้า
Issue Date: 2537
Publisher: จุฬาลงกรณ์มหาวิทยาลัย
Abstract: ไฟแสงสว่างแบบต่อเนื่อง เป็นไฟแสงสว่างที่ใช้หลอดฟลูออเรสเซนต์ขนาด 36 วัตต์ ซึ่งสามารถปิด หรือเปิดใช้ได้ตามความต้องการของผู้ใช้โดยไม่ขึ้นกับสภาพของไฟฟ้ากระแสสลับจากสายส่ง ตราบเท่าที่ยังมีพลังงานคงเหลืออยู่ในแบตเตอรี อุปกรณ์ที่จำเป็นต่อการทำงานของไฟแสงสว่างแบบต่อเนื่อง ประกอบด้วย บัลลาสต์อิเล็กทรอนิกส์ ที่ใช้พลังงานไฟฟ้ากระแสสลับจากสายส่งแรงดัน 220 โวลท์ ความถี่ 50 เฮริต บัลลาสต์อิเล็กทรอนิกส์ที่ใช้พลังงานไฟฟ้ากระแสตรงจากแบตเตอรีแรงดัน 24 โวลท์ วงจรประจุแบตเตอรี วงจรป้องกันแบตเตอรี วงจรควบคุมการทำงานของไฟแสงสว่างแบบต่อเนื่อง รวมทั้งแบตเตอรีจะถูกบรรจุอยู่ภายในโคมไฟแสงสว่างแบบต่อเนื่อง ทำให้สะดวกในการติดตั้ง โคมไฟแสงสว่างแบบต่อเนื่อง สามารถใช้แบตเตอรีแรงดัน 24 โวลท์ ที่มีความจุระหว่าง 1.2 ถึง 4 แอมแปร์-ชั่วโมง ซึ่งจะมีเวลาสำรอง 29 ถึง 143 นาที โดยแบตเตอรีที่มีความจุ 4 แอมแปร์-ชั่วโมง มีราคาต่อเวลาสำรองถูกที่สุด คือ 9.8 บาทต่อนาที นอกจากนี้ยังมีเวลาที่ใช้ประจุแบตเตอรีต่อเวลาสำรง สั้นที่สุดคือ 3.9 เท่า
Other Abstract: An uninterruptible lighting fixture is a lighting fixture which can be used continuously without interruption even during a power line failure period. If the light is turned on, and the ac power is present, a 36-watt fluorescent lamp is fed by the ac power line through an off-line high-frequency electronic ballast. If there is a power line failure, the 36-watt fluorescent lamp is powered by a 24-volt storage battery through a low-voltage electronic ballast. The lamp uses the energy stored in the battery until the energy is exhausted or the ac line is reestablished. The two electronic ballast circuits, battery charger and protection circuits, control circuits, as well as the storage battery are included in the lighting fixture. As all the essential elements are contained in the lighting fixture, and only two feeder wires are required, a conventional lighting fixture can simply be replaced by an uninterruptible lighting fixture without any additional feeder wire. A 24-volt sealed lead-acid battery with 1.2 to4 ampere-hour rating can be put into the uninterruptible lighting fixture. The autonomy time of the battery ranges from 29 to 143 minutes. Best performance figures are obtained with 4 ampere-hour battery. Lowest and shortest charging time to autonomy time ratio is 3.9.
URI: http://cuir.car.chula.ac.th/handle/123456789/2250
Type: Technical Report
Appears in Collections:Eng - Research Reports

Files in This Item:
File Description SizeFormat 
Youthana(light).pdf6.29 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.