Please use this identifier to cite or link to this item: https://cuir.car.chula.ac.th/handle/123456789/42880
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorนเรศร์ จันทน์ขาวen_US
dc.contributor.advisorเดโช ทองอร่ามen_US
dc.contributor.authorณัฐพร ตันทองen_US
dc.contributor.otherจุฬาลงกรณ์มหาวิทยาลัย. คณะวิศวกรรมศาสตร์en_US
dc.date.accessioned2015-06-24T06:22:09Z
dc.date.available2015-06-24T06:22:09Z
dc.date.issued2556en_US
dc.identifier.urihttp://cuir.car.chula.ac.th/handle/123456789/42880
dc.descriptionวิทยานิพนธ์ (วศ.ม.)--จุฬาลงกรณ์มหาวิทยาลัย, 2556en_US
dc.description.abstractงานวิจัยนี้ได้พัฒนาและทดสอบเครื่องจำแนกประเภทของเหลวที่บรรจุในขวดด้วยเทคนิคการส่งผ่านรังสีเอกซ์พลังงานต่ำ โดยใช้หัววัดรังสีเอกซ์ชนิดพรอพอร์ชันแนลวัดรังสีเอกซ์ทั้งสามพลังงานจากต้นกำเนิดพลูโตเนียม-238 คือ 13.6, 17.6 และ 20.1 กิโลอิเล็กตรอนโวลต์รวมกัน ตัวอย่างของเหลวที่นำมาทดสอบได้แก่ กลุ่มของเหลวประเภทที่มีน้ำเป็นองค์ประกอบ น้ำมัน และแอลกอฮอล์ ที่บรรจุในขวดพลาสติกใสขนาดเส้นผ่านศูนย์กลางระหว่าง 2.3 ถึง 5.7 เซนติเมตร ผลการวิจัยพบว่าเทคนิคนี้สามารถระบุประเภทของของเหลวได้ดี และมีความไวมากขึ้นเมื่อขนาดเส้นผ่านศูนย์กลางของขวดบรรจุเพิ่มขึ้น เครื่องที่พัฒนาขึ้นประกอบด้วยแหล่งจ่ายศักดาไฟฟ้าสูง ภาคขยายสัญญาณ อุปกรณ์ตั้งเวลา และอุปกรณ์นับพร้อมด้วยจอแอลซีดี การทำงานของเครื่องถูกควบคุมโดยไมโครคอนโทรลเลอร์ PIC18F4553 ผลการทดสอบพบว่าเครื่องที่พัฒนาขึ้นสามารถแยกแยะน้ำจากแอลกอฮอล์และน้ำมันได้อย่างชัดเจน อัตราส่วนของความเข้มรังสีเอกซ์ที่ทะลุผ่านแอลกอฮอล์และน้ำมันเมื่อเทียบกับน้ำมีค่าประมาณ 3.0 และ 5.0 สำหรับขวดที่มีเส้นผ่านศูนย์กลาง 2.70 เซนติเมตร ประมาณ 3.5 และ 7.5 สำหรับขวดที่มีเส้นผ่านศูนย์กลาง 3.72 เซนติเมตร และ 4.0 และ 11.0 สำหรับขวดที่มีเส้นผ่านศูนย์กลาง 5.30 เซนติเมตร ตามลำดับen_US
dc.description.abstractalternativeIn this work, an instrument for identifying liquid type in bottles using low energy x-ray transmission technique was developed and tested. A proportional x-ray detector was used to measure total counts of the three energy peaks from a plutonium-238 source including 13.6, 17.2 and 20.1 keV. The liquid samples under test were water based solution, alcohol and fuel oil. Each sample was contained in transparent bottles of different diameters between 2.3 and 5.7 cm. The results showed that the technique could be used successfully to identify the liquid type and the sensitivity of the technique was improved with increasing of the bottle diameter. The developed instrument consisted of HV power supply, amplifier, timer and counter with LCD display. Operation of the instrument was controlled by a PIC18F4553 microcontroller. The result showed that the developed instrument could clearly distinguish water from alcohol and fuel oil. The transmitted x-ray intensity ratios through alcohol and fuel oil to through water were approximately 3.0 and 5.0 for 2.70 cm in diameter bottle, 3.5 and 7.5 for 3.72 cm in diameter bottle and 4.0 and 11.0 for 5.3 cm in diameter bottle, respectively.en_US
dc.language.isothen_US
dc.publisherจุฬาลงกรณ์มหาวิทยาลัยen_US
dc.relation.urihttp://doi.org/10.14457/CU.the.2013.315-
dc.rightsจุฬาลงกรณ์มหาวิทยาลัยen_US
dc.subjectเครื่องแยก
dc.subjectรังสีเอกซ์
dc.subjectSeparators (Machines)
dc.subjectX-rays
dc.titleการพัฒนาเครื่องจำแนกประเภทของเหลวโดยใช้เทคนิคนิวเคลียร์en_US
dc.title.alternativeDEVELOPMENT OF AN INSTRUMENT FOR IDENTIFYING LIQUID TYPE USING NUCLEAR TECHNIQUEen_US
dc.typeThesisen_US
dc.degree.nameวิศวกรรมศาสตรมหาบัณฑิตen_US
dc.degree.levelปริญญาโทen_US
dc.degree.disciplineนิวเคลียร์เทคโนโลยีen_US
dc.degree.grantorจุฬาลงกรณ์มหาวิทยาลัยen_US
dc.email.advisornares.c@chula.ac.then_US
dc.email.advisorDecho.T@Chula.ac.th
dc.identifier.DOI10.14457/CU.the.2013.315-
Appears in Collections:Eng - Theses

Files in This Item:
File Description SizeFormat 
5470194321.pdf5.53 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.